Posted in

Are ring magnets available in custom sizes?

Hey folks, if you’ve ever worked with magnets—whether you’re a design engineer building a custom motor, a maker putting together a specialty sensor, or someone just trying to fix that old industrial fixture that’s always given you trouble—you’ve probably asked this one question more times than you can count: Are ring magnets available in custom sizes? And as a ring magnet supplier who’s been deep in this game for over a decade, I get it. The standard off-the-shelf stuff works for a lot of projects, but let’s be real—most of the time, your project’s not standard. That’s why I spend half my days walking customers through custom ring magnet requests, and I’m gonna break down exactly how that works, why it’s not just a “yes” or “no,” and what you need to know before you reach out. Ring Magnet

First, let’s clear up a common myth right off the bat. A lot of folks think “custom” means we start from scratch and build a whole new machine just for their order—but that’s not true. Ring magnets are made using powder metallurgy for most types (like neodymium or ferrite ring magnets, which are the two big ones we supply), and even with custom sizes, we can adapt our existing production lines to dial in dimensions. I see this all the time: a customer comes in asking for a ring that’s 2.125 inches outer diameter, 1.0 inches inner diameter, and 0.25 inches thick—off-the-shelf doesn’t have that, but it’s just a tweak to the tooling that presses the magnet powder. It takes a bit more setup than grabbing a stock 2-inch or 2.25-inch ring, but it’s totally doable.

Wait, but let’s talk about what actually defines a “custom size” here. For ring magnets, size isn’t just diameter and thickness—there’s also tolerance, which is how much a measurement can vary. If your project is a motor that needs a super tight fit (like a brushless drone motor, where even 0.005 inches of extra space can throw off balance), you can’t use a ring with stock tolerances, which are usually around ±0.010 inches for standard parts. Custom tolerances? That’s another tweak, but again, it’s not impossible. We’ve made rings with tolerances as tight as ±0.001 inches for aerospace projects, because those guys don’t mess around with parts that need to perform at 30,000 feet.

But here’s the thing: not all custom requests are created equal. Some people come to us and say “I need a ring magnet that fits this shaft and this housing—figure it out,” and that’s a great start. Others come with a sketch that’s 90% right but has a weird inner diameter or a thickness that’s thinner than our thinnest stock part. Wait, hold on—can we make a ring smaller than, say, 0.1 inches thick? Yeah, but there’s a limit. If you go too thin, the magnet’s structural integrity goes out the window. I had a customer last year who wanted a 0.05-inch thick neodymium ring for a tiny sensor that clips onto a door lock—we could make it, but it would crack just from the pressure of being installed. So we’d work with them to adjust: maybe bump it up to 0.08 inches, which is still thin enough for their product, but durable enough to hold up. It’s a back-and-forth, but that’s part of what we do.

Let’s also dive into the materials, because that’s a big part of why custom size matters. If you need a neodymium ring (which is super strong, great for motors or magnetic separators) vs. a ferrite ring (cheaper, works for things like refrigerator door seals or craft projects), that changes what we can do. Ferrite is easier to shape into custom sizes because it’s less brittle than neodymium—though we still have tricks for neodymium. Rare earth magnets like neodymium are more prone to chipping if you have super tight inner or outer diameters, so we adjust the grinding process for those. For ferrite, we can do way more extreme sizes—like a huge ring for a conveyor system, 24 inches in outer diameter, 12 inches inner, that’s totally custom and no problem. I actually shipped one last month for a recycling plant’s magnetic separator, and they said it’s been running better than their old stock ring.

Another question we get all the time: “How big can you go with custom ring sizes?” We’ve made rings up to 48 inches in outer diameter for large industrial applications, like wind turbine generators or water treatment magnets. On the small end, we’ve done rings as tiny as 0.08 inches outer diameter for medical devices—like a pacemaker component, which needs to be small enough that it doesn’t interfere with other parts. The only time we hit a wall is when the inner diameter is so small that the wall of the magnet (the space between inner and outer) is less than 0.02 inches for neodymium. That’s just too thin to hold the magnetic field, and it’ll break when we magnetize it. But that’s a super edge case—most projects don’t need something that tiny.

Wait, let’s talk about lead times, because that’s a big pain point for people who need custom parts fast. I hear it all the time: “I need this in two weeks, can you do it?” The short answer is: if your custom size is close to a stock part, yes. If you need a totally new tooling setup, maybe 4-6 weeks. But here’s the thing—we don’t make you wait months. We’ve streamlined our process over the last 5 years, so a lot of custom orders that used to take 8 weeks are now done in 3. We also keep a stock of pre-magnetized ring blanks, so if your size fits within a range (like 1.5-2.5 inches outer diameter, 0.75-1.5 inner), we can grind it to your specs in a week. That’s a huge shortcut for customers who are in a pinch, like a engineer who messed up their prototype design and needs a fix stat.

But let’s be honest—there are a few mistakes people make when they ask for custom ring magnets, and I want to help you avoid them. First, don’t just say “custom size” without providing details. The more info you give, the faster we can give you a quote. That means exact outer diameter, inner diameter, thickness, material (neodymium, ferrite, samarium cobalt—yes, we do samarium cobalt too, which is heat resistant for high-temp applications), and any requirements like tolerance, plating (we do nickel plating, zinc, epoxy, gold, whatever you need), and magnetization direction. Oh, right—magnetization is a big one. A lot of people don’t realize that a ring magnet can be radially magnetized (north and south poles around the outer edge), axially magnetized (poles on the top and bottom), or multipole magnetized (like 8 poles around the ring for a motor). If you’re mixing a custom size with a non-standard magnetization, that’s doable, but it adds a little time, so mentioning that early is key.

Last year, I had a maker reach out on a forum (we’re active on a few, for the record) who wanted a custom ring for a DIY wind turbine. They said “outer diameter 10 inches, inner 5 inches, thickness 1 inch, neodymium, radially magnetized.” That’s pretty straightforward—we quoted them, adjusted the thickness slightly because their original spec was thinner than we recommend for that size, they agreed, and we had it to them in 3 weeks. It worked way better than the stock parts they were trying to use, and they left a great review saying their turbine was putting out 20% more power. That’s the kind of win we live for—helping people make their projects actually work, not just fit.

Another common question: “Is custom ring magnet pricing way more expensive than stock?” Yeah, sometimes, but not as much as you think. A lot of suppliers hike prices for custom orders, but we keep it reasonable because we know small businesses, makers, and startups don’t have big budgets. We price custom parts based on the tooling time and material used, not a random markup. For example, a custom 2-inch ring is only $2 more than a stock one, and the setup cost is spread across your order, so if you’re ordering 50 pieces, that’s like $0.04 per piece extra. Way better than paying for a whole new production line.

Now, let’s address the times when custom sizes might not be the best call. If your project is something super simple, like a craft project or a small household item, stock rings are probably fine and cheaper. But if you’re working on a motor, a sensor, industrial equipment, medical devices, or any application where precision and performance matter, custom is almost always worth it. I’ve seen too many projects fail because someone tried to force a stock ring that was slightly wrong, leading to reduced performance, premature wear, or even the whole product not working. That’s a headache we can help you avoid.

Wait, let’s get specific about a recent example. A customer in the automotive industry came to us with a custom ring for an electric power steering system. Their stock ring was 2.5 inches outer diameter, but it was causing friction in the steering column, leading to driver complaints. They needed a ring that was 2.49 inches outer diameter, with a 1.25-inch inner diameter, and a tolerance of ±0.002 inches. We had to adjust our grinding machine to get that tight tolerance, and it took a couple extra days, but the end result was a ring that fit perfectly, eliminated the friction, and their testing showed a 15% improvement in steering responsiveness. That’s exactly why custom sizes matter—sometimes even 0.01 inches makes a huge difference.

So, to circle back to the original question: Are ring magnets available in custom sizes? The answer is a resounding yes—but it’s not just “yes, send us your dimensions.” It’s a collaborative process between us, your project needs, and what’s technically possible with magnet manufacturing. We’re not a big corporation that treats every customer like a number; we’re the guys who actually know ring magnets inside and out, and we’ve been through enough custom orders to know how to make it work for you.

If you’re sitting there right now thinking “yeah, I have that project that stock just won’t fit,” don’t hesitate to reach out. You don’t need to have every single detail figured out—even if you just have a sketch or a rough idea of what you need, we can walk you through it. We’ll ask you a few quick questions about material, tolerance, and lead time, give you a fair quote, and get your custom ring magnet made exactly how you need it. No weird hoops to jump through, no hidden fees, just straight talk and a product that works for your project.

At the end of the day, that’s what it’s all about. Magnets might seem simple, but getting the right size, strength, and fit can make or break a product. We’ve seen it a thousand times, and we’re here to make sure you don’t have to deal with the hassle of settling for something that’s almost right. So go ahead, send over your details—let’s talk through your custom ring magnet needs.

Magnetic Sticks References

  1. C. J. Heck, Powder Metallurgy of Permanent Magnets, 3rd Edition, 2018
  2. Magnetic Materials Association, Tolerance Standards for Ring Magnets, 2021
  3. Industrial Magnetics Association, Custom Magnet Manufacturing Best Practices, 2022

Xiamen Zhaobao Magnet Co., Ltd.
With abundant experience, we are one of the most professional ring magnet manufacturers and suppliers in China. Please feel free to wholesale advanced ring magnet made in China here from our factory. All customized products are with high quality and competitive price.
Address: Room 201, No.15, Longxinli, Siming District, Xiamen, Fujian, China
E-mail: zb16@magnets-world.com
WebSite: https://www.zbmagnet-king.com/