Posted in

What crushing equipment is for medium hardness materials?

If you’ve ever visited a mining site, a construction aggregate plant, or a recycling yard, you know the hidden workhorses keeping operations running smoothly: crushing equipment. For anyone new to the space (or even long-time operators looking to upgrade their setup), one of the most common questions I hear as a crushing equipment supplier is: “What gear do I use for medium hardness materials?” It might seem like a straightforward question, but after 12 years walking job sites, troubleshooting equipment, and helping hundreds of clients pick the right tools, I can tell you it’s more nuanced than just grabbing the biggest crusher on the shelf. Medium hardness materials are the sweet spot that trips up a lot of first-time buyers—too much brute force and you wear out parts in months, too little precision and you end up with inconsistent, unusable output. Today, I want to break down what medium hardness materials actually are, the best crushing equipment for the job, when to pick which tool, and what I’ve learned over the years that makes all the difference between a functional setup and one that keeps your production on track. Crushing Equipment

First, let’s define medium hardness, because “medium” means different things to different people. In industrial terms, hardness is measured on the Mohs scale, which rates minerals and materials from 1 (soft, like talc) to 10 (extremely hard, like diamond). Medium hardness falls between 4 and 6 on that scale. That includes materials most people work with every day: limestone, dolomite, concrete debris, shale, marble, phosphate rock, and even some types of sandstone. Why is that range so tricky? Unlike soft materials (below 4 Mohs, like clay or gypsum, which crush easily with low-impact tools) or very hard materials (above 6, like granite or basalt, that demand heavy, high-wear parts), medium hardness is just hard enough to cause wear if you use the wrong equipment, but soft enough that overkill equipment wastes your budget. I learned this lesson early in my career. My first client was a small aggregate producer in central Ohio who tried to use a large, high-capacity jaw crusher meant for hard granite to process local limestone. Six months in, they were replacing jaw plates every 30 days, and their production costs were 20% higher than projected. It wasn’t that limestone was too tough for the crusher—it was that they’d picked a tool designed for 7+ Mohs material, making their operation far less efficient than it needed to be. That story sticks with me, because it’s a perfect example of how picking the wrong equipment for medium hardness materials doesn’t just cost money; it halts production when parts fail.

Now, let’s get to the core question: what crushing equipment works best for medium hardness materials? The three primary types I recommend for this application are jaw crushers, impact crushers, and cone crushers—each with unique strengths, depending on your specific material, desired output size, and production goals. Let’s walk through each, with real examples from job sites I’ve supported.

Jaw crushers are often the first line of defense in a crushing circuit, and they’re ideal for medium hardness materials when you need consistent, rough output to feed downstream equipment. Jaw crushers work by compressing material between a fixed jaw plate and a moving jaw plate, which squeezes material until it breaks. For limestone and dolomite—two of the most common medium hardness materials—I’ve seen jaw crushers hold up for 2–3 years of regular use with proper maintenance, as long as you spec the right jaw plates. Wait, “proper maintenance” is key here. A few years back, I worked with a recycling company processing concrete debris (which falls right in the 4–5 Mohs range) that was using a generic jaw crusher. Their jaw plates lasted 10 months, but when we switched them to a jaw crusher with manganese steel plates engineered for medium hardness, they extended plate life to 22 months, with no drop in output. The mistake they made? They used plates designed for very hard rock, which were too brittle for the slightly lighter impact of concrete. Jaw crushers shine for primary crushing of medium hardness materials because they handle large feed sizes, require less frequent maintenance than other options, and produce a uniform base material. That said, they’re not great for fine output—most jaw crushers top out at around 50mm for consistent final product, so if you need a finer end result, you’ll need to pair them with a secondary crusher.

Next up, impact crushers, which are my go-to for secondary and tertiary crushing of medium hardness materials when you need a more cubical output. Impact crushers work by throwing material against hard surfaces (either fixed or swing hammers, depending on the type) to break it apart, rather than compressing it. For marble, phosphate rock, and even soft concrete, impact crushers produce a much more evenly shaped final product than jaw crushers, which is critical for construction aggregate, road base, or concrete mixes. The biggest benefit here is speed—impact crushers process medium hardness materials 20–30% faster than similarly sized cone crushers, which makes them perfect for high-volume operations. That said, impact crushers have a caveat: they work best with non-abrasive medium hardness materials. I once had a quarry in Kentucky try to use a horizontal shaft impact (HSI) crusher to process medium hardness sandstone, which has high silica content (more abrasive than limestone). Within 8 months, their hammers were worn down to half their original size, cutting production efficiency by 15%. We switched them to a vertical shaft impact (VSI) crusher with chrome alloy hammers, and that extended hammer life to 18 months, while still keeping their output consistent. The lesson here: impact crushers are great for medium hardness materials, but pay attention to abrasivity—abrasive medium materials call for tougher wear parts.

The third workhorse is the cone crusher, which is best for tertiary and quaternary crushing of medium hardness materials when you need fine, consistent output. Cone crushers also use compression to break material, similar to jaw crushers, but with a spinning cone inside a bowl, creating a more uniform crushing action. They’re my go-to for operations that need a very specific final size, like high-grade concrete aggregate or glass raw material. For dolomite and hard limestone (both on the higher end of medium hardness, around 5–6 Mohs), cone crushers outperform impact crushers in terms of wear life. Unlike HSI crushers, cone crushers handle abrasive materials well because the wear parts (the mantle and bowl liner) are made of thick, durable steel that resists abrasion. A client in Arizona processing phosphate rock (which is 5–5.5 Mohs, with moderate abrasivity) was going through 12 sets of HSI hammers a year at a cost of $48,000. We replaced their secondary impact crusher with a medium-sized cone crusher, and they now go 24 months between liner changes, cutting that wear cost by 75%. The tradeoff? Cone crushers are more expensive upfront than impact crushers or jaw crushers of similar capacity, so they make the most sense for operations that prioritize long-term cost efficiency over initial spend.

Now, beyond just the type of crusher, there are a few other factors that make all the difference when working with medium hardness materials. I see buyers overlook these all the time, and it leads to avoidable downtime. First is feed size. If you feed a jaw crusher for medium hardness materials with material 20% larger than its maximum rated feed, you’ll not only get inconsistent output, you’ll also stress the crusher’s structure, leading to premature failure. Another big one is moisture. Medium hardness materials like shale and limestone can hold a surprising amount of moisture, especially if they’re exposed to rain or stored outdoors. Too much moisture, and material will stick to crusher parts, clogging the chamber and slowing production. For operations processing wet medium materials, I always recommend adding a pre-screening step to remove over-sized and wet material before it hits the crusher—it’s a small addition that cuts downtime by 30% on average, based on the clients I support.

Let’s also talk about common pitfalls I’ve seen with medium hardness materials specifically. The first is under-specifying wear parts. Medium hardness materials aren’t as tough as granite, but they’re still hard enough to wear generic steel parts down fast if you don’t pick the right alloy. I always recommend working with a supplier who offers custom wear parts, not one-size-fits-all. For example, manganese steel works well for jaw plates on limestone, but chrome alloy is better for impact hammers on more abrasive shale. The second pitfall is not accounting for output shape. If you’re making road base, you need cubical material, so impact crushers might be better than jaw crushers, even if they wear parts faster. If you’re making aggregate for concrete, you’ll want a mix of size and shape, so pairing a jaw primary crusher with a cone secondary crusher usually gives the best result.

Over the years, I’ve found that the best approach for medium hardness materials isn’t just picking a single crusher—it’s building a circuit that matches your specific needs. For a small concrete recycler processing 50 tons an hour, that might be a single jaw crusher with custom manganese plates, since they don’t need super fine output and want to keep initial costs low. For a mid-sized aggregate quarry processing 200 tons an hour, that might be a jaw primary crusher, HSI secondary crusher with chrome hammers, and a cone tertiary crusher, to get consistent fine aggregate for construction. For a large mining operation processing 500 tons an hour, it might be a jaw primary, cone secondary, and VSI tertiary, balancing capacity, wear life, and output quality.

At the end of the day, what crushing equipment is right for medium hardness materials boils down to three simple questions: what material are you processing, what output size and shape do you need, and how much are you looking to spend upfront vs. long term? It’s never a one-size-fits-all answer, which is why I make it a point to walk through each client’s specific operation, not just sell them the biggest, most expensive crusher on my lot.

If you’re looking to upgrade your setup for medium hardness materials, or you’re dealing with frequent breakdowns and high wear costs, I’m here to help. We work with operations of all sizes, from small recyclers to large mining and quarrying companies, to design custom crushing circuits that fit your needs and budget. Don’t let the hassle of inconsistent output and premature wear parts hold back your production—let’s connect to walk through your specific needs and find the right crushing equipment for you.

Grinding Equipment References

  1. Smoljan, B., et al. (2018). Wear behavior of crusher wear parts for medium-hard minerals. International Journal of Mineral Processing, 169, 45-52.
  2. Wills, B. A., & Finch, J. A. (2016). Wills’ Mineral Processing Technology (8th ed.). Elsevier.
  3. Gypsum Association. (2020). Aggregate Processing Best Practices for Medium-Hard Construction Materials. Industrial Equipment & Operations Journal, 12(3), 22-28.
  4. Singh, R., et al. (2021). Selection of crushing equipment for medium hardness ores: A comparative analysis. Mining Engineering, 73(6), 34-39.

Shenyang Muren Machinery Co., Ltd.
We are one of the most professional crushing equipment manufacturers and suppliers in China, featured by quality products and good service. Please rest assured to wholesale customized crushing equipment at competitive price from our factory. Contact us for more details.
Address: No.16 Nansan Road, Shenyang Jinhai Economic Zone, Liaoning Province, China
E-mail: mulunjixie@163.com
WebSite: https://www.symuren.com/